3050 Direct Fired Heater | On Site Co

Restroom Calculator

Need an estimate for how many porta potties your event needs? Use this handy calculator! For a more specific quote tailored to your needs, call us today at 800-210-8407!

Home / Climate Control / Portable Heating / Direct Fired Heaters / 3050 Direct Fired Heater

Specifications

Input	3,500,000 BTU Hi Fire / 1,200,000 BTU Lo Fire
Fuel	Vapor Propane/Natural Gas
Gas Consumption	44 GPH Propane/ 4,000 CFH Natural Gas
Gas Connection	3/4″ FNPT
Electrical	240V 1Ø 30 Amps
Fan	16,000 CFM 5.0 HP 3″ SP
Thermostat	HI-LO Standard
Temp Rise	241°F
Weight	460 lbs.

The 3050 Direct Fired Heater is safe to use at low housing temperatures and can run on either vapor propane, liquid propane or natural gas. Ductable up to 300 feet, it also has two levels of output for heating options. Also with a weather sealed control box, this heater can be used at any time of year.

Benefits

Safe fuel shutdown if combustion air is interrupted
Low housing temperature
May be ducted up to 300 feet
Safe monitoring of combustion, two trial electronic ignition with 20 second pre-purge time delay and 7 second shutdown
Direct wire with easy, safe 100% power shut off
Protects heater by shutting down if unit is being overfired
Helps in diagnosing specific gas flow problems
Protects heater by shutting down if voltage is too low
Easy monitoring of control voltage to ensure trouble-free operation
Automatically cycles the heater high-

The 3050 Direct Fired Heater Available in:

Minneapolis/ St. Paul, Minnesota
Rochester, Minnesota
Mankato, Minnesota
St. Louis, Missouri

Related Products

On Site Companies can offer you a wide range of portable toilet and sanitation solutions to serve your needs.

S405 Direct Fired Heater

The S405 Portable Direct Fired Heater, provided by On Site Companies is the smallest direct fired heating solution that we provide. This portable heater is CSA Approved for unintended use, which makes it easy to keep your job site warm. It is also light enough so only one person is needed for operation. It is designed for use on construction sites and has a thermostat to help conserve fuel.

S1505 Direct Fired Heater

The S1505 Portable Direct Fired Heater, provided by On Site Companies, is an efficient direct fired heater that can meet the needs of large job sites or homes. This heater is designed to use less amp draw, which allows it to run on a 15 amp circuit. The updated heater control board also allows you to start the heater with as few as 95 volts and can run stable when voltage drops below 83 volts. With the cold winters in the Mid-West, you can also be assured that this heater can run in temperatures as low as -40F.

1801 Direct Fired Heater

The 1801 Portable Direct Fired Heater, provided by On Site Companies, will equip your home, business or job site with the heat that you require to be comfortable and efficient. This AGA Certified unit has an air flow switch, burner heat shield and flame safeguard control to ensure safety and efficiency during use. With dual fuel capabilities, you will also have more options on how to run your equipment. The 1801 also has a hi limit switch, panel mounted thermostat and weather sealed control box for optimal usage during the colder months.